DIY Motorcycle Kickstand Pad: The Essential Safety Accessory
Picture yourself cruising down the open road on your motorcycle, wind in your hair and a sense of freedom coursing through your veins. But wait!
What’s that you see? A less-than-stable parking spot?
Don’t fret, adventurous rider, because we have just the solution for you – a DIY motorcycle kickstand pad. This nifty little device will keep your two-wheeled companion upright and secure, whether you’re parking on grass, gravel, or any other uneven surface.
In this exhilarating tutorial, we’ll guide you through the installation process, revealing expert tips and tricks along the way. So, gear up and get ready to conquer the world of DIY motorcycle maintenance with Lowbrow Learning!
diy motorcycle kickstand pad
To create a DIY motorcycle kickstand pad, you can follow these steps. Start by obtaining a piece of sturdy material such as rubber or plastic.
Cut it into a shape that is wider and longer than the footprint of your kickstand. Next, attach adhesive Velcro strips to the bottom of the pad and the desired mounting surface.
This will allow you to easily attach and detach the pad as needed. Finally, make sure to clean the mounting surface thoroughly and securely attach the DIY kickstand pad to it.
This homemade pad will provide stability and prevent your kickstand from sinking into soft ground or damaging delicate surfaces.
Key Points:
- Obtain a sturdy material like rubber or plastic
- Cut it into a shape larger than the footprint of your kickstand
- Attach adhesive Velcro strips to the bottom of the pad and mounting surface
- Clean the mounting surface and securely attach the pad
- Provides stability and prevents sinkage into soft ground or damage to delicate surfaces
- Can easily attach and detach as needed using Velcro strips
Sources
https://www.youtube.com/watch?v=LwXGGzA8GqE
https://www.lowbrowcustoms.com/blogs/motorcycle-how-to-guides/lowbrow-learnins-how-to-diy-motorcycle-kickstand-install
https://www.advrider.com/f/threads/diy-side-stand-footpad-increase-step-by-step-walk-thru.339822/
https://www.youtube.com/watch?v=yw80osblRe4
Check this out:
💡 Pro Tips:
1. Before welding the kickstand in place, consider adding rubber or non-slip material to the pad for extra stability and to prevent the kickstand from sinking into soft ground.
2. Double-check the kickstand placement by ensuring that it allows enough clearance for your motorcycle’s exhaust system and any aftermarket accessories that may get in the way.
3. Regularly inspect the kickstand pad for any cracks, wear, or damage, as a worn-out pad may decrease its effectiveness and compromise the bike’s stability.
4. If you frequently park on uneven or soft surfaces, consider investing in a portable kickstand pad that you can carry with you to ensure stability in various parking conditions.
5. If your motorcycle does not come equipped with a kickstand safety switch, consider adding one to prevent accidentally starting the engine while the kickstand is down. This can prevent accidents and damage to your motorcycle.
1. Install A Weld-On Universal Motorcycle Kickstand
Installing a weld-on universal motorcycle kickstand is a necessary step to ensure the stability and safety of your motorcycle. A kickstand provides a secure resting position when your bike is not in motion, preventing it from tipping over and causing potential damage.
To install a weld-on kickstand, follow these steps:
First, gather all the necessary tools and materials, including the kickstand, a welder, and welding accessories. Ensure that the kickstand is compatible with your motorcycle’s make and model.
Before installing the kickstand, it is crucial to set up your wheels, tires, and ride height according to your bike manufacturer’s guidelines. Any changes in fork length or wheel size can significantly affect your bike’s geometry and lean, potentially compromising its stability.
2. Set Up Wheels, Tires, And Ride Height Before Installing Kickstand
To set up the wheels, tires, and ride height properly, refer to your motorcycle’s owner’s manual or manufacturer’s instructions. This step is vital as it ensures that your bike’s suspension functions optimally, providing a safe and comfortable riding experience.
To adjust the ride height, you may need to use tools such as a wrench or spanner to alter the preload on your shocks or forks. By doing so, you can modify the bike’s overall height and maintain the desired balance.
Note: Changes in fork length or wheel size can affect your motorcycle’s geometry and lean. It is essential to consult professional advice or refer to reliable resources to ensure that any modifications are made correctly.
3. Potential Impact Of Fork Length Or Wheel Size Changes On Bike’s Geometry
It is crucial to understand that any alterations to your motorcycle’s fork length or wheel size can have a significant impact on its geometry and overall performance. These changes can influence the bike’s handling, stability, and lean angles.
Therefore, it is advisable to consult with experts or refer to reliable resources specific to your bike model to ensure that any modifications are performed correctly and safely.
4. Proper Placement Of Kickstand In Up Position To Avoid Damage To Engine Case
When placing the kickstand in the up position, it is essential to avoid positioning it under the engine case. Placing the kickstand under the engine case, especially during the installation process, may lead to damage to the case or other critical components.
This could potentially compromise the safety and functionality of your motorcycle.
5. Proper Support Methods For Bike During Kickstand Installation
To provide proper support during the kickstand installation process, you can use a cherry picker with a ratchet strap or stack objects, such as wooden blocks or bricks, under the motorcycle’s frame. This additional support ensures that the bike remains stable and secure while you work on installing the kickstand.
In some cases, the engine may need to be temporarily removed to fully weld the kickstand to the motorcycle’s frame. This step may require advanced mechanical skills and expertise.
Therefore, it is recommended to consult with an experienced welder or mechanic to ensure a proper and secure installation.
6. Recommended Precautions And Expertise For Welding And Supporting Bike Weight
When welding the kickstand into place, it is crucial to exercise caution and adhere to proper safety protocols. Welding involves high temperatures and can pose potential risks, both to the welder and the motorcycle itself.
It is highly recommended to seek the assistance of an experienced welder to ensure that the kickstand is correctly and securely welded to the frame.
In addition to a skilled welder, ensuring proper support for the weight of the motorcycle during the installation process is essential. The bike should be adequately secured using the aforementioned methods, such as a cherry picker with a ratchet strap or stacked supporting objects.
This precaution guarantees stability and prevents any accidents while the kickstand is being installed.
By following these guidelines and taking necessary precautions, you can successfully install a weld-on universal motorcycle kickstand. Remember, the safety of both you and your bike is of utmost importance, so it is always advisable to seek professional guidance or assistance if you are unsure about any part of the installation process.
Other tutorial posts available at Lowbrow Learning include:
– Installing breather bolts and master cylinder cover
– Fork shrouds on Harley-Davidson Sportster
With the essential knowledge gained from these tutorials, you can ensure that your motorcycle maintenance and modifications are performed correctly, ensuring both your safety and enhanced biking experience.