BMW e30 Cup Holder DIY: Maximize Comfort and Functionality!
Are you tired of fumbling around for your drink while driving in your beloved BMW E30? Wish you had a sleek cup holder to perfectly complement your vintage ride?
Look no further! In this DIY guide, we will show you how to create a fully customizable cup holder for your BMW E30, using inexpensive materials and straightforward step-by-step instructions.
Not only will we guide you through the process of constructing the cup holder, but we’ll also share insider tips on reupholstering the interior and finding replacement parts. Get ready to enhance your driving experience with this stylish and practical addition!
BMW e30 cup holder diy
If you are looking for a cost-effective and customizable cup holder solution for your BMW E30 car, a DIY project may be the perfect option for you. By following a few simple steps, you can create a cup holder that meets your specific needs while adding a touch of personalization to your car’s interior.
To begin, you will need to acquire an armrest from a car junkyard. These can typically be found for around $10.
Sewing skills are also required for this project, but you can easily learn the necessary techniques by watching YouTube videos. Start by dismantling the armrest using torque bits or suitable alternatives.
Next, use old leather pieces as templates to cut new material from Joanne’s fabrics. Sew the new material onto the armrest in the same pattern as the previous leather, using a French seam for a neat finish.
Test fit the new upholstered armrest and secure the new material in place using upholstery spray glue. If any parts of the cup holder are broken, look for replacements at a car junkyard or use zip ties as a temporary fix.
Once you have all the components ready, install the cup holder back into your car, ensuring it looks like it belongs. For added stability and an OEM appearance, utilize nuts, bolts, and angles that can be found around the house.
However, exercise caution when using tools, as the author warns against using a half-broken spade bit, which can cause plastic to crack. To maximize space for the handbrake, consider mounting the hinge backwards.
Finally, reupholster the car’s interior with brown material and use leftover material to match the shift boot. This DIY cup holder not only provides functionality and convenience but also allows for customization and cost-effectiveness.
If you have any questions or feedback, feel free to reach out to the author.
Key Points:
- Create a cost-effective and customizable cup holder for your BMW E30 with a DIY project.
- Acquire an armrest from a car junkyard for around $10.
- Learn sewing skills through YouTube tutorials and dismantle the armrest using torque bits.
- Cut new material from Joanne’s fabrics and sew it onto the armrest in the same pattern as the previous leather.
- Test fit the new upholstered armrest, secure the new material with upholstery spray glue, and replace any broken parts.
- Install the cup holder back into your car using nuts, bolts, and angles for stability, and consider mounting the hinge backwards for more space.
Sources
https://bnguidebook.wordpress.com/2015/06/22/car-diy-bmw-e30-armrest-with-cupholders/
https://garagistic.zendesk.com/hc/en-us/articles/360046323614-Garagistic-BMW-E30-cupholder
https://www.etsy.com/market/bmw_cup_holder_e30
https://www.bimmerfest.com/threads/diy-for-bmw-cup-holder-console-led-lights-pictures.336485/
Check this out:
๐ก Pro Tips:
1. Consider using a heat gun to soften the plastic before attempting to take the cup holder apart, making it easier to work with.
2. If you’re unable to find a suitable armrest at a car junkyard, try looking for one online or at a local auto parts store.
3. Experiment with different fabrics and materials to achieve a unique and personalized look for your cup holder.
4. To add stability to the cup holder, reinforce the mounting points with strong adhesive or epoxy.
5. If you’re not confident in your sewing skills, consider reaching out to a local upholstery shop for assistance with upholstering the armrest.
Diy Cup Holder Project For Bmw E30 Car
Are you tired of holding your drink while driving your BMW E30 car? Well, fret no more!
In this article, we will take you through a step-by-step DIY project to create a cup holder specifically designed for your beloved BMW E30. Say goodbye to spilled drinks and hello to a more convenient and comfortable driving experience!
Affordable And Homemade Alternatives To Bmw E30 Cup Holders
If you’re looking for an alternative cup holder that won’t break the bank, look no further. We have compiled a list of affordable and homemade options that can be easily made at home.
These alternatives not only save you money but also allow for customization to match your car’s interior.
Designing A Functional And Aesthetically Pleasing Cup Holder For Bmw E30
When creating a cup holder for your BMW E30, it is important to keep functionality and aesthetics in mind. You want a cup holder that doesn’t obstruct the handbrake, is placed where your arm naturally rests, floats over the heated seats switch, and looks like it belongs in the car’s interior.
The cup holder should have two cup holders, allowing you to have multiple drinks within reach. Additionally, it should be adjustable, enabling you to choose between zero, one, or two cup holders, depending on your preference.
To achieve a seamless look, we recommend using nuts, bolts, and angles found around the house for stability. This will not only provide a professional finish but also make your cup holder look OEM (Original Equipment Manufacturer).
Adjustable Cup Holder With Lazy Shifting Support For Bmw E30
One of the key requirements for a cup holder in a BMW E30 is the ability to support lazy shifting with the armrest. You want a cup holder that is wide enough to accommodate two people sitting in the front seats comfortably.
This will enhance your driving experience by allowing you to rest your arm while enjoying your favorite beverage.
To maximize space, consider mounting the hinge of the cup holder backward. This will create more room for the handbrake, ensuring that your cup holder does not hinder its functionality.
Cost-Saving Tips For Creating A Cup Holder With Car Junkyard Finds
If you’re on a budget or enjoy the thrill of hunting for car parts, utilizing a car junkyard can be a great way to find replacements for broken cup holder parts. Look for the specific parts you need to fix any issues or use zip ties as a temporary fix until proper replacements can be found.
Additionally, reupholstering your BMW E30’s interior can give it a fresh and personalized touch. Look for brown material that matches the overall aesthetic of your car and use leftover material to create a matching shift boot.
This not only saves money but also adds a touch of customization to your cup holder project.
Step-By-Step Guide: Upholstering And Installing Bmw E30 Cup Holder
Now comes the exciting part ้ฅ?the step-by-step guide to creating and installing your BMW E30 cup holder! Here’s what you need to do:
- Take the armrest apart using torque bits or alternative tools.
Be careful not to damage any of the components. 2.
Use old leather pieces as templates and cut new material from Joanne’s fabrics. Make sure to match the same pattern as the previous leather.
Sew the new material using French seam, ensuring a strong and durable cup holder.
Test fit the new upholstered armrest and use upholstery spray glue to secure the new material in place.
Find a suitable replacement for any broken cup holder parts by visiting a car junkyard or using temporary fixes such as zip ties.
Install the cup holder back into the car, making sure it looks like it belongs and fits seamlessly with the interior.
Enjoy the comfort and convenience of your newly created cup holder while driving your BMW E30.
We hope this comprehensive DIY guide has provided you with all the necessary information to create a cup holder for your BMW E30. Remember, customization and cost-effectiveness are key when embarking on this project.
Feel free to reach out to the author with any questions, feedback, or requests you may have. Now go ahead and maximize the comfort and functionality of your BMW E30 with a custom-made cup holder!
Author invites questions, feedback, or requests.
